Network Trace for OS/2
- Turn any OS/2 machine into a network probe.
- Take a trace on any segment in the network, in minutes.
- A software-only, hardware-independent implementation.
      http://www.goldencode.com/ntrace.html

*********************************************************************
 
Source: Jan Eri (jan.eri@protector-group.no)
Moderator: Trevor Smith (feedback@warpcast.com)
-------------------------------------------------------
 
I have noted that the driver software for Eicon DIVA ISDN cards has
been updated. Below is info from the readme:

  Additional Installation Info for Eicon DIVA Client cards under
  OS/2

  Version 6.03e

  The Protocol driver can now be loaded for PCMCIA cards (DIVA/PCM
  and DIVA Pro PC- Card) without the need that the PCMCIA adapter
  must be plugged during the boot process. This is achieved by the
  new command line parameter "-f".

  The parameter "-fC" sets up the driver to support a DIVA Pro
  PC-Card, whereas the parameter "-fM" sets up the driver to support
  the DIVA/PCM adapter. The driver is then prepared to initialise the
  appropriate card if it is plugged after the initialisation process
  of the protocol driver.

  If one of the two PCMCIA card types is plugged during the
  initialisation process, the "force" parameter is left unrecognized.
  This parameter is case insensitive.

Eicon is at:

  http://www.eicon.com/ 
 
-------------------------------------------------------
 To subscribe, unsubscribe, or for more information on
 WarpCast, visit: http://www.warpcast.com/ 
-------------------------------------------------------